Panasonic PT-MZ11KLU WUXGA 3LCD Laser Projector

FeatureSpecificationProjector typeLCD projectorLCD Panel | Panel Size25.4 mm (1.0 in) diagonal (16:10 aspect ratio)LCD Panel | Display SystemTransparent LCD panel (x 3, R/G/B)LCD Panel | Drive MethodActive matrix methodLCD Panel | Pixels2,304,000 (1920 x 1200 pixels)Light SourceLaser diodeLight Output*1 *216,500 lmTime until light output declines to 50 %*320,000 hours (NORMAL/QUIET)ResolutionWUXGA (1920 x 1200 pixels)Contrast Ratio*13,000,000:1 (Full On/Full Off) (When [PICTURE MODE] is set to [DYNAMIC] and [DYNAMIC CONTRAST] set to [3].)Screen Size (Diagonal)2.03–15.24 m (80–600 in), 2.54–10.16 m (100–400 in) with ET-EMU100,2.03–12.70 m (80–500 in) with ET-EMT8004, 16:10 aspect ratioCenter-to-corner zone ratio*185 %LensOptional (no lens included with this model)Lens shift | Vertical (from center of screen)±60 % (+50 %, -20 % with ET-EMU100, ±40 % with ET-EMW200, ±50 % with ET-EMW300) (powered)Lens shift | Horizontal (from center of screen)±20 % (±19 % with ET-EMW200) (powered)Keystone Correction RangeVertical: ±45 ° (±5 ° with ET-EMU100, ±14 ° with ET-EMW200/ET-EMW300, ±22 ° with ET-EMW400/ET-EMW500), Horizontal: ±40 ° (±0 ° with ET-EMU100, ±8 ° with ET-EMW200/ET-EMW300,±15 ° with ET-EMW400/ET-EMW500). When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55 °.Terminals | SDI InBNC x 1: 3G/HD-SDI inputTerminals | HDMI InHDMI 19-pin x 2 (Compatible with HDCP 2.3, Deep Color, 4K/60p signal input5), CEC supportedTerminals | Serial/Multi Projector Sync InD-sub 9-pin (female) x 1 for external control (RS-232C compliant)Terminals | Serial/Multi Projector Sync OutD-sub 9-pin (male) x 1 for link control (RS-232C compliant)Terminals | REMOTE 1D-sub 9-pin (female) × 1 for external control (parallel)Terminals | Remote 2 InM3 x 1 for wired remote controlTerminals | Remote 2 OutM3 x 1 for link control (for wired remote control)Terminals | DIGITAL LINKRJ-45 x 1 for network and DIGITAL LINK connection (video/network/serial control) (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2],Art-Net, HDCP 2.3, Deep Color, 4K/60p signal input*5 )Terminals | LANRJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net)Terminals | DC OutUSB connector (Type A) x 1 for power supply (Output: 5 V / 2 A)Terminals | USBUSB connector (Type A) x 1 for optional AJ-WM50 Series Wireless Module, for USB memoryPower SupplyAC 100–240 V, 50/60 HzFilterIncluded (Estimated maintenance time: approx. 20,000 hours *7)Operation noise*135 dB (NORMAL), 30 dB (QUIET)Dimensions (W x H x D)Approx. 650 x 185 x 440 mm (25 19/32˝ x 7 9/32˝ x 17 5/16˝ ) (excluding feet and protrusions),
650 x 211 x 440 mm (25 19/32˝ x 8 5/16˝ x 17 5/16˝ ) (excluding protrusions, feet at shortest position)Weight*8Approx. 22.5 kg (49.6 lbs)Operating EnvironmentOperating temperature: 0–45 °C (32–113 °F)*9, operating humidity: 10–80 % (no condensation)Applicable SoftwareLogo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro, Projector Network Setup Software, Smart Projector Control for iOS/Android™Note*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is average of all products when shipped. *2 When [OPERATING MODE] is set to [NORMAL]. This is the value when the Zoom Lens (Model No.: ET-EMS650) is used. Thevalue varies depending on the lens. *3 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast contents, NORMAL Mode, [DYNAMIC CONTRAST] set to [3], under conditions with 30 °C (86 °F), 700 m (2,297 ft) above sea level, and 0.15 mg/m3 ofparticulate matter. Estimated time until light output decreases to 50 % will vary depending on environment. *4 ET-EMT800 is compatible with PT-MZ17KL/MZ14KL/MZ11KL only. It cannot be used with PT-MZ20KL. *5 4K signals are converted to the projector's resolution (1920 x 1200 pixels) uponprojection. 4K/60p and 4K/50p signals input via DIGITAL LINK are supported in YPBPR 4:2:0 format only. *6 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. On-mode power consumption measured at 25 °C (77 °F) operatingtemperature at an altitude of 700 m (2,297 ft). *7 Under conditions of 0.15 mg/m3 of particulate matter. Estimated maintenance time varies depending on environment. Filter can be washed and reused up to two times. *8 Average value. May differ depending on the actual unit. *9 Note that the projectorcannot be used at altitudes 2,700 m (8,858 ft) or higher above sea level. In the following operating environments, light output may be reduced to protect the projector: when the projector is used at altitudes below 1,400 m (4,593 ft) and ambient temperature is 35 °C (95 °F) or higher; when theprojector is used at altitudes between 1,400 m (4,593 ft) and 2,700 m (8,858 ft) exclusive and ambient temperature is 30 °C (86 °F) or higher. The operating environment temperature should be between 0 °C (32 °F) and 40 °C (104 °F) when the optional AJ-WM50 Series Wireless Module is attached.Power consumption*6 | Maximum power consumption615 W (6.3–2.7 A) (630 VA)Power consumption*6 | On-mode power consumption (Light power)[Normal]540 W (AC 100–120 V),520 W (AC 200–240 V)Power consumption*6 | On-mode power consumption (Light power)[Quiet]360 W (AC 100–120 V),340 W (AC 200–240 V)